GE 200D9366P020 Owner's Manual And Installation Instructions page 40

Before you call for service...
Troubleshooting Tips
Problem
My display is showing
Water filter indicator
light changed color
Water filter indicator light
remains red even after
replacing the water filter
Water filter indicator
light is not lit
Handle is loose / handle
has a gap
Refrigerator beeping
Control setting is not lit
Refrigerator doors are
not even (on Double Door
models only)
40
Possible Causes
TurboCool function is activated.
This is normal.
Water filter indicator must
be reset.
This is normal. This light will
turn orange to tell you that you
need to replace the filter soon.
The filter cartridge should be
replaced when the replacement
indicator light turns red.
Handle needs adjusting.
This is the door alarm.
On some models, the light
bulbs at the top of the refrigerator light bulbs are burned out, and replace if necessary.
compartment light up the
temperature control settings.
Doors need realigning.
What To Do
See About TurboCool for more information.
See About the water filter for more information.
Press and hold the RESET WATER FILTER pad for
3 seconds. See About the water filter for more information.
See About the water filter for more information.
See Attach the Fresh Food handle and Attach the
Freezer handle sections for detailed instructions.
Close door.
If the control settings do not light up, check to see if the
See Align Double Doors section located under
Replacing the Door (Double Door Refrigerator Models only).