Frequently Asked Questions - Miele T 8023 C Operating And Installation Manual

Frequently asked questions

What if the dryer will not run?
Possible fault
The "Start/Stop" button was not
pressed.
The circuit breaker tripped or the dryer
is unplugged.
The door is not closed.
How do I prevent static cling?
Add fabric softener to laundry when washing or select the "Less Dry" setting on
the dryer.
Do not use fabric softener sheets in this dryer.
What if the drum light does not come on?
Possible fault
The bulb may be bad or burned out.
What if the "Child Lock" indicator flashes after turning the dryer on and a
program cannot be started?
Possible fault
The child lock is activated.
What if the program stops, the "End/Anti-crease" indicator lights and the
buzzer sounds?
Possible fault
The drum is empty.
20
Solution
Make sure the dryer is on. Press the
"Start/ Stop" button to begin the drying
program.
Make sure the dryer is plugged in or
reset the circuit breaker.
Close the door properly.
Solution
See "Changing the light bulb."
Solution
Deactivate the child lock. See "Child
Lock."
Solution
Load laundry into the dryer. The dryer
will not operate when the drum is
empty. Single items should be dried
with "Sturdy" or a timed program and
dry items in the "Fluff" program.