Optional Equipment Connection; Antenna Connection - Zenith DVT721 - Home Theater in a Box System Installation And Operating Manual

Optional Equipment Connection

Connect the USB port of a USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
Front of DVD/CD Receiver
USB Memory, MP3 Player (or
Memory Card Reader, etc.)
the USB Device from the unit
Removing
1. Choose a different function mode or press STOP (x)
twice in a row.
2. Remove the USB device from the unit.
Notes:
Don't extract the USB device while operating.
Music files (MP3/WMA), image files (JPEG) and DivX
files can be played.
This unit cannot use a USB HUB.
Recommended Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multimedia Card (MMC), Memory Stick Pro
(MS-Pro)
- Compatible with: FAT16, FAT32
- Only use the memory cards recommended.
Devices which require additional program installation
when you have connected the unit to a computer are
not supported.
In case of a USB HDD, make sure to connect an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive are
supported. If there is an extension partition, it will not
be supported.
If the drive of USB device is two or more, a drive
folder is displayed on the screen. If you want to
move to the initial menu after you select a folder,
press RETURN.
Digital cameras and mobile phones are not
supported.

Antenna Connection

Connect the supplied FM/AM antenna for listening to
the radio.
Connect the AM Loop aerial to the AM aerial
connector.
Connect the FM Wire aerial to the FM aerial
connector.
Notes:
To prevent noise pickup, keep the AM Loop aerial away
from the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire aerial.
After connecting the FM Wire aerial, keep it as horizontal as
possible.
FM Wire Antenna
(supplied)
AUX IN
AM Loop Antenna
(supplied)
L
C S
O C
A
M
R R
P.
T
9