Preparing to install the refrigerator.
Read these instructions completely and carefully.
Water Supply to the Icemaker
If the refrigerator has an icemaker, it will have to be connected to a
cold water line.
A water supply kit (containing copper tubing, shutoff valve, fittings
and instructions) is available at extra cost from your dealer or from
Parts and Accessories, 800-626-2002.
Refrigerator Location
Do not install the refrigerator where the temperature will go below
60°F (16°C) because it will not run often enough to maintain
proper temperatures.
Install it on a floor strong enough to support it fully loaded.
Clearances
Allow the following clearances for ease of installation, proper air
circulation and plumbing and electrical connections:
If a 19 , 22 or 25 model is to be installed next to a wall on the hinge
side, allow 1
Sides
3/4 (19 mm)
Top
1 (25 mm)
Back
1 (25 mm)
(38 mm) for door clearance.
1
2
(on some models)
23