Advertisement
Do not drop or strike the 3D Conversion Lens when
carrying it.
Also, be careful not to apply strong force to the 3D
Conversion Lens.
• Be careful that no shock is applied to the 3D
Conversion Lens by dropping or striking the bag with
the 3D Conversion Lens stored within. It may cause a
malfunction or stop images from being recorded. It
may also damage the 3D Conversion Lens.
• Do not carry the video camera with the 3D
Conversion Lens attached by holding onto the 3D
Conversion Lens only.
4
VQT3A68(ENG)
Do not use or store the 3D Conversion Lens in the
following places since it may cause a failure or
malfunction.
- In direct sunlight or at the beach in summer, etc.
- Areas with high temperature and/or humidity, or
where there is rapid change in temperature and/or
humidity
- Areas with a lot of sand and dust
- Areas close to fire
- Close to air-conditioners and/or humidifiers
- Areas where it may get wet
- Areas with vibration
- inside a car
• Do not disassem ble or modify.
• When the 3D Conversion Lens has not been used for
a long period of time, check to see if there is any
looseness in the attachment of the 3D Conversion
Lens and adjust the attachment position before use.
• When not in use, put the lens caps on, place it inside
the lens storage bag, and store in a place with low
humidity. (-+ 13)
• Also read the operating instructions of the video
camera.
Advertisement
