Panasonic VW-CLT1 Owner's Manual page 11

2
For users who have [HDC-SD90]/[HDC-TM90]
Remove the lens rear cap from the step up ring and attach the step up ring to the 3D
Conversion Lens.
• Attach the step up ring to the 3D Conversion Lens first, and then attach the step up ring part to the video camera.
• Video is not recorded properly when only the step up ring is attached to the video camera.
• Attach the step up ring to the 3D Conversion Lens with the [.. UP] mark side up .
~
• Tighten the attachment screw of
the 3D Conversion Lens by
rotating to LOCK.
o
the convex
o
the concave
3
Match the position of the convex
e
with the
concave
e
in the video camera.
• Attach with the adjustment dial cover
e
of the 3D Conversion
Lens facing upwards.
• You cannot attach the 3D Conversion Lens together with the
lens hood or a filter etc.
11
(ENG)VQT3A68