Advertisement
When using for the first time, be sure to adjust the 3D Conversion Lens attachment position.
• Change the mode to .;; on the video camera.
1
Attach the 3D Conversion Lens to the
video camera. (.. 10)
2
Turn on the video camera.
• Turn on with the video camera in a horizontal state.
• The 3D Conversion Lens adjustment mode screen
will appear automatically after performing the initial
setting.
• If the 3D Conversion Lens adjustment mode
screen does not appear automatically, set from
the menu on the video camera.
([SETUP]
~
[3D CONV. LENS SETUP])
3
Attach the lens front cap to the 3D
Conversion Lens. (.. 14)
' · , · . " · . " . .
,,.AQ~9~T
... ,·,·,
o
Guide Line
• 2 screens will appear.
• The horizontal line for adjustment on the lens front
cap is displayed on the screen.
4
Touch [ADJUST].
• If the black vertical line and the black horizontal line
are within the red guidelines
0
and adjustment is not
required, touch [EXIT] and proceed to Step 11.
• Perform the adjustment in a bright location where the
horizontal line for adjustment will be clearly visible.
15
(ENG)VQT3A68
Advertisement
