Table of Contents
Advertisement
Electric Ignition
Your surface burners are lighted by electric ignition,
eliminating the need for standing pilot lights with
constantly burning flames.
In case of a power failure, you can light the surface
burners on your range with a match. Hold a lighted
match to the burner, then turn the knob to the LITE
position. Use extreme caution when lighting
burners this way.
Surface Burner Controls
Knobs that turn the surface burners on and off are
marked as to which burners they control. The two
knobs on the left control the left front and left rear
burners. The two knobs on the right, nearest to the
control panel, control the right front and right
rear burners.
To Light a Surface Burner
Push the control knob
in and turn it
counterclockwise to
LITE. You will hear a
little clicking
noise—the sound of
the electric spark
igniting the burner.
After Lighting a Burner
Check to be sure the burner you
turned on is the one you want
to use.
Surface burners in use when an electrical power
failure occurs will continue to operate normally.
Super Burner
On some models, the right front burner is cone-shaped
with a circular opening through the center of the
burner. This burner can provide 3090 more power
than any one of the other three. Use it for canning or
large pans.
After the burner
ignites, turn the
knob to adjust the
flame size.
Do not operate a burner for an
extended period of time without
cookware on the grate. The finish
on the grate may chip without
cookware to absorb the heat.
Be sure the burners and grates are
cool before you place your hand, a
pot holder, cleaning cloths or other
materials on them.
9
Advertisement
Table of Contents
