GE JGSP20GER Use And Care Manual page 25

After a Clean Cycle
When the clean cycle is finished, the word "CLEAN"
will go out in the display and the oven will begin to
cool. When the oven temperature has fallen below the
locking temperature, the-
word "LOCK" goes out and
the door can be opened.
How to Delay Start of Cleaning
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day. NOTE: Before beginning, make sure the
oven clock shows the correct time of day.
Quick Reminder—Delay Start for Self-Clean:
1. Prepare the oven for cleaning.
2. Press the CLEAN pad.
3. Press the INCREASE pad.
4. Press the STOP TIME pad.
Time that appears is 3 hours later than the time
of day. Press the INCREASE pad until the Stop
Time you desire appears in the display. The
self-clean cycle will automatically begin 3 hours
before the Stop Time you select.
For example: Let's say it's 7:00 and you want the
oven to begin self-cleaning at 9:00 after you're
finished in the kitchen. The oven is just soiled a
normal amount so the normal Clean Time of 3 hours
is preferred.
Step 1: Prepare the oven for cleaning.
Step 2: Close the oven door.
Step 3: Press the CLEAN pad.
CLEAN
Step 4: Press the INCREASE pad.
After a clean cycle, you may notice some white ash in
the oven. Just wipe it up with a damp cloth. If white
wool pad. Be sure to rinse thoroughly with a vinegar
and water mixture. These deposits are usually a salt
residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, the cycle
may be repeated.
Step 5: Clean Time for heavy soil can be set for
4 hours. If a longer or shorter Clean Time is desired,
press the INCREASE or DECREASE pad until
desired Clean Time is displayed.
Step 6: Press the STOP TIME pad.
STOP
"STOP TIME" flashes. The control
TIME automatically sets Stop Time by
adding the Clean Time to the time of
day. In this example, the time of day is
Adding 3 hours to the time of day
equals 10:00,
Step 7: Change Stop Time from 10:00 to 12:00 by
pressing the INCREASE pad until "12:00" appears
in the display. The words "DELAY CLEAN" will also
appear in the display.
The self-clean cycle will automatically begin at 9:00
and finish at 12:00. The word "ON" will appear on
the display at 9:00.
When the oven locks, the word "LOCK" will be
displayed and the door will be locked in position. It
will not be possible to open the oven door until the
temperature drops below the lock temperature.
When the clean cycle is finished, the word "CLEAN"
will go out in the display and the oven will begin to
cool. When the oven temperature has fallen below
the locking temperature, the word "LOCK" goes out
and the door can be opened.
Step 8: When the LOCK light is off open the door.
25