PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on the reverse side of this page. Important: Some
parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags,
check to see if it has been pre-assembled. If a part is missing, call toll-free 1-888-936-4266.
M8 Split Washer (52)
M10 Split Washer (103)
M8 Washer (59)
M10 Washer (75)
19mm Spacer (17)
22mm Spacer (106)
38mm Round
Inner Cap (38)
25mm Square Inner Cap (54)
19mm Round Inner Cap (78)
45mm Round
Inner Cap (56)
50mm Round
Inner Cap (57)
50mm Square
Inner Cap (98)
57mm Round Outer Cap (27)
38mm x 64mm Inner Cap (41)