Specifications; Warranty Information - La Crosse Technology WS-6010U-IT Instruction Manual

DISPLAY NEXT: Install batteries into the display according to the diagram in the battery
compartment. After powering up the solar clock, all LCD segments will light up briefly and it will show the
time (12:00), indoor temperature, date, and indoor humidity
BATTERY MODE: Leave switch on Battery mode.
CONNECTION: Allow the sensor and display to remain 5 feet apart for 15 minutes to establish a
strong connection. Do not press buttons at this time. You should see a reading on the outdoor
temperature area in the first minute. After 15 minutes, return the sensor outside.

SPECIFICATIONS:

Indoor Temperature Range: 15.8 F to 139.8 F
Indoor Humidity Range: 20%-95%
Outdoor Temperature Range: -39.2 F to 139.8F
Outdoor Humidity Range: 20%-95%
Transmission Range: 200 Feet (open air, no obstructions)
Power Requirements:
Solar Receiver Power: 2 "AA" rechargeable alkaline batteries included
Can also use regular alkaline batteries
Solar Sensor Power: built-in rechargeable power cell (no batteries to install)

WARRANTY INFORMATION

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing
defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products purchased and
used in North America and only to the original purchaser of this product. To receive warranty service, the
purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures.
Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The
original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology,
Ltd or La Crosse Technology, Ltd's authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated
herein, with new or reconditioned parts or products if found to be defective during the limited warranty
period specified above. All replaced parts and products become the property of La Crosse Technology,
Ltd and must be returned to La Crosse Technology, Ltd.
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever
is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered
by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which
is not in need or repair, you will be charged for the repairs or examination.
The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to
a La Crosse Technology, Ltd authorized service center.
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the
following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including
the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must
be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4)
damage resulting from failure to follow instructions contained in your owner's manual; (5) damage
resulting from the performance of repairs or alterations by someone other than an authorized La Crosse
Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and
uses that this product was not intended or (8) the products inability to receive a signal due to any source
of interference.
This warranty covers only actual defects within the product itself, and does not cover the cost of
installation or removal from a fixed installation, normal set-up or adjustments, claims based on
8