Advertisement
Quick Links
Solar Powered Wireless Temperature
Solar
panels
TX62U-IT
Sensor
Alkaline
Rechargeable
Batteries NOT
replaceable
Solar panel
1. Insert the 2 "AA" Rechargeable Alkaline batteries (included) into
the solar station. Observe the correct polarity.
2. Next, slide the battery switch to the SOLAR Position (UP).
3. Gently press the RESET button on the Sensor to activate.
4. After 5 minutes place sensor outside in a shaded location.
Note: Do not use sharp objects to press the RESET button. Use a
small dull pointed object or a straightened paper clip to gently press
the RESET button
Restart: If the outdoor temperature shows dashes, remove batteries
from the temperature station and move battery switch to the DOWN
position. Press any button on the temperature station 20 times. After
15 minutes, return to step 1 above.
WS-6020U-IT
Station & Sensor
Outdoor
Temp.
Indoor
Temp.
MIN & MAX
Outdoor or
Indoor Temp.
Get Started
www.lacrossetechnology.com/support
Model: WS-6020U-IT
Battery
Switch
Removable
Stand
RESET
button
Note: This station reads in °F only.
Instruction Manual
DC: 112116
2-AA Batteries
Rechargeable
Batteries
Included
Page | 1
Advertisement
Related Manuals for La Crosse Technology WS-6020U-IT
Summary of Contents for La Crosse Technology WS-6020U-IT
- Page 1 Model: WS-6020U-IT Instruction Manual DC: 112116 Solar Powered Wireless Temperature Station & Sensor Outdoor Temp. Indoor Solar Battery Temp. panels Switch MIN & MAX Outdoor or Indoor Temp. Removable Stand 2-AA Batteries Rechargeable Batteries Included TX62U-IT RESET Sensor button Alkaline...
-
Page 2: Min/Max Readings
Position Outdoor Sensor It is important to place the sensor in a bright environment for the • solar panel to collect enough light to recharge the internal power cell. WS-6020U-IT www.lacrossetechnology.com/support Page | 2... -
Page 3: Low Battery Icon
The solar station will not perform any operation and the LCD will • also be OFF. Press the MIN/MAX button to wake up the solar station. • WS-6020U-IT www.lacrossetechnology.com/support Page | 3... -
Page 4: Stop Mode
Always purchase the correct size and grade of battery suitable for • the intended use. Replace all batteries of a set at the same time. • Clean the battery contacts and also those of the device prior to • battery installation. WS-6020U-IT www.lacrossetechnology.com/support Page | 4... -
Page 5: Specifications
TX62U-IT Sensor: (128.3 x 36.1 x 16 mm) Warranty and Support Information La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf... - Page 6 This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized. WS-6020U-IT www.lacrossetechnology.com/support Page | 6...