Installation - Virtual Reality VRCD400-USB Owner's Manual

Installation

Disconnect negative battery terminal from battery before starting instal-
lation. Consult the vehicle's owner's manual for proper instructions.
NOTE:.Mark.the.polarity.of.the.existing.speaker.wires.before.disconnecting.battery.
NOTE:.Remove.the.two.transport.screws.from.the.top.of.the.unit.before.installing.
DIN Front Mount
1.. After. removing. the. old.
radio. and. mounting. sleeve,.
insert. supplied.
ing. sleeve. into. opening.
3.. Attach. wires. from. the.
VRCD400-USB.
ing. wires.. See. wiring. connec-
tions. diagram.. Insert. radio. into.
dashboard.. Then. apply. the. .
trim. frame. to. outside. of. radio.
WARNING!
mount-
to. exist-
GIVE US A CALL, WE'LL HELP YOU INSTALL.
1-800-445-1797
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
PLEASE DO NOT RETURN PRODUCT TO STORE.
Call number above for assistance,
2..Bend.the.tabs.on.the.mount-
ing.sleeve.to.keep.the.mount-
ing. sleeve. firmly. in. place.
4.. Support. radio. using. sup-
plied. rear. mounting. bolt.
and. steel. bar.. See. parts. list.
or visit us on the WEB
www.vr-3.com
5