Schwinn 450 Elliptical Assembly Manual page 51

Fan will not turn on or will
not turn off
Fan will not turn on, but
Console operates
Unit rocks/does not sit
level
Foot pedals loose/unit dif-
ficult to operate
Clicking sound when op-
erating
Check data cable integrity
Check data cable
connections/orientation
Reset machine
Check for blockage of fan
Check leveler adjustment
Check surface under unit
Hardware
Check pedal arm to crank
arm connection
All wires in cable should be intact. If any
are cut or crimped, replace cable.
Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Unplug unit from electrical outlet for 3
minutes. Reconnect to outlet.
Unplug unit from electrical outlet for 5
minutes. Remove material from fan. If
necessary, detach the Console to help
with removal. Replace the Console if
unable to remove blockage.
Adjust levelers until machine is level.
Adjustment may not be able to com-
pensate for extremely uneven surfaces.
Move machine to level area.
Tightly secure all hardware on the Pedal
Arms and Handlebar Arms.
Remove pedal arms and reattach.
51