Brother MFC-J6520DW Quick Setup Manual page 6

h
Take care to match the sticker colour a with
the cartridge colour b as shown in the diagram
below.
Install each ink cartridge in the direction of the
arrow on the label.
1
2
i
Gently push the back of the ink cartridge
marked "PUSH" until the cartridge lever lifts.
After all the ink cartridges are installed, close
the ink cartridge cover.
NOTE
The machine will prepare the ink tube system for
printing. This process will take approximately four
minutes. Do not turn off the machine. We
recommend you perform the next step while
waiting.
6
4
Load plain A4 paper
a
Pull the paper tray (for MFC-J6720DW, paper
tray #1) a, completely out of the machine.
b
Gently press and slide the paper side guides a
to fit the paper size. Make sure that the
triangular mark b on the paper side guide a
lines up with the mark for the paper size you
are using.
c
Open the output paper tray cover a.
1
1
2
1