For Macintosh Usb Interface Users - Brother MFC-J6520DW Quick Setup Manual

USB

For Macintosh USB interface users

17
Before you install
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
NOTE
For Mac OS X v10.6.0 to 10.6.7 users, upgrade to
Mac OS X v10.6.8 - 10.8.x.
18
Connect the USB cable
NOTE
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
a
Lift the scanner cover until it locks securely into
the open position.
(Mac OS X v10.6.8, 10.7.x, 10.8.x)
b
Connect the USB cable to the USB port
marked with a
USB port inside the machine, as shown in the
callout below.
c
Carefully guide the USB cable into the cable
channel and out the back of the machine.
Connect the cable to your Macintosh.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Macintosh
symbol a. You will find the
1
17