Brother MFC-J6520DW Quick Setup Manual page 7

d
Gently press and slide the paper length
guide a to fit the paper size.
Make sure that the triangular marks b on the
paper length guide a lines up with the mark for
the paper size you are using.
2
e
Close the output paper tray cover.
f
Fan the stack of paper well to avoid paper jams
and misfeeds.
NOTE
Always make sure that the paper is not curled or
wrinkled.
1
g
Gently put the paper into the paper tray (for
MFC-J6720DW, tray #1).
IMPORTANT
Make sure the paper is flat in the tray. If the paper
is pushed against the back of the tray, it may
cause paper feed problems.
h
Gently adjust the paper side guides to fit the
paper with both hands. Make sure that the
paper side guides touch the sides of the paper.
i
Check that the paper is flat in the tray and
below the maximum paper mark a.
1
7