Pioneer AVIC-HD3 Operation Manual page 181

MAN-HD3-SOFTW-EN.book Page 179 Wednesday, January 10, 2007 9:33 AM
Message
Registration failed.
Automatic connection in progress.
Please try again later.
Automatic connection in progress.
Please try manually later.
Could not find any available phone.
Bluetooth unit error. It is not possible
to find any mobile phones.
Bluetooth unit error. The device
name could not be set.
Registration is not available.
Reading failed.
Calibration failed.
Please refer to the owner's manual.
The HDD is not connected.
Cannot use HDD.
There is no applicable program.
The HDD cannot be operated due to
excessive heat.
Please move your vehicle to a safe
place and turn the power off until the
temperature goes down.
When
The mobile phone's Bluetooth wire-
less technology is turned off during
the registration step.
Rejection by the mobile phone has
received.
Registration step has failed for some
reason.
If you try to perform another opera-
tion during automatic connection by
the system.
If you try to connect another phone
during automatic connection by the
system.
No available phone exists in the sur-
roundings when the system searches
for the mobile phone featuring Blue-
tooth wireless technology for regis-
tration.
If the Bluetooth unit (sold separately)
is disconnected from this navigation
system or Bluetooth unit carries out
another processing when the system
search the mobile phone featuring
Bluetooth wireless technology for
registration.
If the Bluetooth unit (sold separately)
is disconnected from this navigation
system or the Bluetooth unit carries
out another process when you
change the device name.
If you try to perform another opera-
tion immediately after connection
failure.
• If you transferred the data from
your mobile phone in a format can
not be received with navigation sys-
tem.
• Disconnection has been made dur-
ing transfer for some reason.
The touch panel calibration has not
been carried out with appropriate
steps.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Hard disk drive cannot run due to
high temperature.
What to do
Keep turning the target phone's
Bluetooth wireless technology on
during the registration.
Operate the target phone and accept
the registration request from the nav-
igation system. (Furthermore, check
the connection settings on your
mobile phone.
Retry the registration and if the regis-
tration still fails, try registering using
your mobile phone.
• Wait for a while and retry.
• Establish that connection tempo-
rarily and retry that later.
Establish that connection temporar-
ily and retry it later.
• Turn the target phone's Bluetooth
wireless technology on.
• Check whether your mobile phone
is turned off and, whether the dis-
tance to your mobile phone is too
far.
• Check the connection and retry.
• Establish that connection tempo-
rarily and retry later.
• Check the connection and retry.
• Establish that connection tempo-
rarily and retry later.
Wait for a while and retry.
• Select just a suitable item, format,
and then retry.
• Connect your mobile phone again
and retry.
Please read the instruction of touch
panel calibration and retry.
Page 166
Consult your dealer.
Consult your dealer.
Consult your dealer.
Park your vehicle to safe place, turn
the ignition switch off, and wait until
the temperature inside the vehicle
drops.
179