Modifying The General Settings For Navigation Functions; Entering The Settings Menu; Setting The Volume For Guidance And Phone; Customising The Regional Settings - Pioneer AVIC-HD3 Operation Manual

MAN-HD3-SOFTW-EN.book Page 81 Wednesday, January 10, 2007 9:33 AM

Modifying the General Settings for Navigation Functions

• For safety reasons, these functions are not
available while your vehicle is in motion.
To enable these functions, you must stop
in a safe place and put on the handbrake
before setting your route (see page 18 for
details).

Entering the Settings Menu

1
Press the MENU button to display the
navigation menu.
2
Touch [Settings] to display the Settings
menu.
3
Change the setting.
Adjusting each item
Setting the Volume for Guidance
and Phone
The sound volume for the navigation can be set.
You can separately set the volume of the route
guidance and the beep sound.
1
Touch [Settings] in the navigation menu,
then touch [Volume].
2
Touch [+] or [–] to set their volume.
On this screen, you can operate the following
items.
Guidance
This setting controls the guidance volume of
navigation.
When set to , guidance is output. When
set to , no guidance is output.
Beep
This setting controls the beep tone volume for
navigation.
Phone Ringtone
This setting controls the incoming ring tone
volume.
Phone Voice
This setting controls the incoming voice vol-
ume.
Page 81 to 88 3
To finish the setting, touch [OK].
Customising the Regional Set-
tings
Changing the language for navi-
gation guidance and menu
You can select the language to be used for the
navigation function. (Once you change the lan-
guage, the system restarts.)
1
Touch [Settings] in the navigation menu,
then touch [Regional Settings].
2
Touch [Language].
Chapter 9
The Phone Ringtone and Phone Voice
adjustments are related to the mobile
phone featuring Bluetooth technology. No
adjustment is needed when the mobile
phone featuring Bluetooth technology is
not connected.
Volume of the audio source is adjusted by
the VOL (8/2) button of the navigation
system.
81