Using The Av Source (Av, Ext, Aux); Operating The Av Input Source (Av); Selecting [Av Input] As The Source; Operating The External Unit (Ext) - Pioneer AVIC-HD3 Operation Manual

MAN-HD3-SOFTW-EN.book Page 127 Wednesday, January 10, 2007 9:33 AM

Using the AV Source (AV, EXT, AUX)

Operating the AV Input source
(AV)
• For safety reasons, visual images cannot
be viewed while your vehicle is in motion.
To view visual images, you must stop in a
safe place and put on the handbrake
before setting your route (see page 18 for
details).
Selecting [AV INPUT] as the
source
1
[AV Input] is set to [Video].
"Setting the video input"
2
Touch the source icon and touch [AV
INPUT].
For details, refer to "Selecting a source"
Page 89
Operating the External Unit
(EXT)
The term "external unit" refers to future Pioneer
devices that are not currently planned for, or
devices that allow control of basic functions
although they are not fully controlled by the navi-
gation system. Two external units can be control-
led by this navigation system. When two external
units are connected, the navigation system allo-
cates them to external unit 1 or external unit 2.
For details concerning operation, refer to the
external unit's operation manual. This section
provides information on external unit operations
with the navigation system that differ from those
described in the external unit's operation man-
ual.
Operation varies depending on the external
unit connected. (In some cases, the external
unit may not respond.)
Selecting [EXT 1] or [EXT 2] as
the source
1
Touch the source icon and touch [EXT 1]
or [EXT 2].
For details, refer to "Selecting a source"
Page 89

Screen configuration

(1)
Page 138
(1) Source icon
Shows which source has been selected.
(2) External unit indicator
Displays any connected external units.
(3) Auto/Manual mode indicator
Shows the current mode.
"Switching the automatic and manual func-
tion"

Touch key operation

1
Touch the source icon and then touch
[EXT 1] or [EXT 2] to select the external
unit.
When the source icon is not displayed, you
can display it by touching the screen.
Chapter 13
(3) (2)
Page 129
127