Using The Av Source (Av, Ext, Aux); Operating The Av Input Source; Selecting [Av Input] As The Source; Operating The External Unit - Pioneer AVIC-HD3II Operation Manual

Using the AV Source (AV, EXT, AUX)

Operating the AV Input source

CAUTION
For safety reasons, visual images cannot be
viewed while your vehicle is in motion. To view vi-
sual images, you must stop in a safe place and
put on the handbrake before setting your route
(For details, refer to To ensure safe driving on page
19).

Selecting [AV INPUT] as the source

1 [AV Input] is set to [Video].
= For details, refer to Setting the video input
on page 134
2 Touch the source icon and touch
[AV INPUT].
= For details, refer to Selecting a source on
page 85

Operating the External Unit

The term "external unit" refers to future
Pioneer devices that are not currently planned
for, or devices that allow control of basic func-
tions although they are not fully controlled by
the navigation system. Two external units can
be controlled by this navigation system. When
two external units are connected, the naviga-
tion system allocates them to external unit 1
or external unit 2.
For details concerning operation, refer to the
external unit's operation manual. This section
provides information on external unit opera-
tions with the navigation system that differ
from those described in the external unit's op-
eration manual.
p Operation varies depending on the external
unit connected. (In some cases, the exter-
nal unit may not respond.)
Selecting [EXT 1] or [EXT 2] as
the source
% Touch the source icon and touch [EXT 1]
or [EXT 2].
= For details, refer to Selecting a source on
page 85

Screen configuration

1 32
1 Source icon
Shows which source has been selected.
2 External unit indicator
Displays any connected external units.
3 Auto/Manual mode indicator
Shows the current mode.
= For details, refer to Switching the automatic
and manual function on the next page

Touch panel key operation

% Touch the source icon and then touch
[EXT 1] or [EXT 2] to select the external
unit.
When the source icon is not displayed, you
can display it by touching the screen.
Touch panel keys
3
1 Send an a, b, c, or d command
2
1
4
Engb
Chapter
14
123