LCD display
Changing LCD language
You can change the LCD language.
1
Not available in Australia and New Zealand.
(MFC-J825DW only)
a
Press Menu.
b
Press a or b to display
Initial Setup.
c
Press Initial Setup.
d
Press a or b to display
Local Language.
e
Press Local Language.
f
Press your language.
g
Press Stop/Exit.
Setting the Dim Timer for the
backlight
You can set how long the LCD backlight stays
on after the last key press.
a
Press Menu.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display LCD Settings.
e
Press LCD Settings.
f
Press Dim Timer.
g
Press 10 Secs, 20 Secs, 30 Secs or
Off.
h
Press Stop/Exit.
Mode Timer
1
(MFC-J825DW only)
1
The machine has four temporary mode keys
1
on the control panel: FAX, SCAN, COPY and
PHOTO. You can change the amount of time
the machine takes after the last Scan, Copy
or PhotoCapture operation before it returns to
FAX mode. If you choose Off, the machine
stays in the mode you used last by default.
a
Press Menu.
b
Press a or b to display
1
General Setup.
c
Press General Setup.
d
Press a or b to display Mode Timer.
e
Press Mode Timer.
f
Press 0 Sec, 30 Secs, 1 Min,
2 Mins, 5 Mins or Off.
g
Press Stop/Exit.
General setup
1
1
3