Duplex (2-Sided) Copying - Brother MFC-J825DW Advanced User's Manual

Chapter 7

Duplex (2-sided) copying

You can reduce the amount of paper used for
copies by copying on both sides of the paper.
We recommend you load your document in
the ADF for duplex copying. For 2-sided
documents and books use the scanner glass.
(long edge flip)
Portrait
1
2
Landscape
1
2
(short edge flip)
Portrait
1
2
Landscape
1
2
Note
• 2in1(ID), Poster, Fit to Page and
Book Copy are not available with
Duplex Copy.
• You can only use plain paper sizes A4, A5
or Letter.
38
7
1 1
1
1
1 1
1 1
a
Press (COPY) or Copy.
b
Press d or c to display Duplex Copy.
c
Press Duplex Copy.
d
Press On to turn on the duplex settings.
e
Press Portrait LongEdgeFlip,
Landscape LongEdgeFlip,
Portrait ShortEdgeFlip or
Landscape ShortEdgeFlip.
f
Press after reading the message
on the LCD.
g
Load your document.
h
Enter the number of copies you want.
If you want to sort multiple copies, press
d or c to display Stack/Sort and
press Stack/Sort, then press Sort.
i
Press Mono Start or Colour Start.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to step j.
j
The LCD shows:
Turn over the document
(or Flip the book), then
press Scan. When you finish,
press Complete.
Place the next page on the scanner
glass and press Scan. Press
Mono Start or Colour Start.
The machine starts printing.
k
If you pressed Sort for multiple copies,
repeat step j for each additional page.
After all the pages have been scanned,
press Complete.
The machine starts printing.