Connecting To Equipment - Strong SRT 5495T User Manual

Connecting to Equipment

How to get good reception
• You do not need to change or replace your existing TV antenna to receive digital
signal. However, if your antenna is not in a good condition it is recommended that you
consider replacing it to ensure uninterrupted digital television viewing.
• Viewers in areas of poor analog reception may need specialists' advice about
antenna requirements for digital reception in their area.
• It's recommended that viewers use quad shielded cable from the antenna to the
receivers.
Connections to a TV
There are several ways of connecting this unit to the TV and Hi-Fi System. For High
Definition viewing your TV must support either 576i, 720p, 1080i, 1080p resolution.
Also the connection between the unit and TV must be either YPbPr Component or
HDMI. Other connections will provide Standard Definition viewing.
Warning
Please switch OFF the mains power before plugging or unplugging connected cables,
otherwise, it may damage this unit!
Connect the unit via Video and Audio
(for Standard Definition viewing)
1. Connect the antenna with ANT IN of the unit.
2. Connect the RF loop cable via LOOP IN and LOOP OUT.
3. Connect the unit via Video/Audio L/R.
8