Welcome to Swissvoice The eSense is a cordless telephone designed for connection to an analog telephone network. International DECT (GAP)-standard digital technology offers excellent voice quality. You can register up to 5 handsets to your base and make internal calls free of charge.
Insert the battery Connecting the phone Set date and time Set language Telephoning Keypad lock Redial PBX operation Paging – Locate mislaid handsets Phonebook Direct memory Calls list Extending the eSense Telephoning with several call partners Personal settings Advanced settings Appendix eSense...
Display symbols Steady on: batterie’s charge level. Flashing: batteries have to be charged. 12:03 Time. Call in progress. Steady on : the caller’s list is open. Flashing : new calls in the caller’s list. The phonebook is open. Scroll up/down in a list or a menu.
Battery advice Use only the original battery (Li-Ion 3.7 V / 550 mAh) as well as the original power sup- ply (6.5 VDC, 300 mA or 7.5 VDC, 200 mA). The handset operating times (standby 150 hours/active 10 hours) and charging times apply only if the battery is charged to the defined minimum capacity.
Connecting the phone Mains power socket Telephone line socket • Before you can start using your telephone you must plug in the telephone connector cable and the mains cable. • When the phone is delivered, the battery is not yet charged.
Telephoning • Dial the desired number using the keypad. • Press the Talk key End the call Press the End call key Accepting a call • Incoming calls are signalled by a ring tone and a quick flashing of the control LED on the handset.
Set alarm tone , select Clock/Alarm using the navigation key (up/down) and • Press press Select Alarm tone using the navigation key (up/down) and press • • Select the desired alarm melody and press The activated alarm is displayed in standby mode by The alarm sounds for 60 seconds or can be deactivated immediately by pressing any key.
Paging – Locate mislaid handsets All registered handsets ring for one minute, when the Paging key on the base is pressed. To stop the ring press the End call key on the handset or the Paging key on the base.
Direct memory Phone numbers from the phone book can be assigned to numerical keys 1 to 9. Programming direct memory keys , select Phonebook and press • Press Select Direct mem and press • • Select the desired memory key and press twice.
Press Select Unregister and press • • The eSense may now ask for the PIN. If so, enter the PIN (default 0000) and press • Press again to confirm. Your handset is now no longer registered with any base station.
• After a few seconds you will be asked to enter the PIN. • Enter the PIN (default 0000) and press • If registration is successful you will hear the dialling tone when you press the Talk , and after one minute the handset will go to standby mode.
• Long press the navigation key (right) to start a conference call. If one of the hand- sets presses the End call key, the other handset will be connected to the external call. Personal settings , select Personal set and press •...
Advanced settings , select Advanced set and press • Press • Select a function from the list using the navigation key (up/down) and press - Recall Time – Select the recall time (flash time) for the analogue network functionalities in your country.
The adapter used to convert Internet/cable telephony to analog telephony (usually supplied by the provider) may not forward the functions to connected telephones or may forward them in a non-analog format. If this happens, please check the eSense on an analog fixed line and/or contact your Internet/cable telephony provider. Care Your telephone is a sophisticated product in terms of design and construction, and should therefore be handled with care.
Page 17
Disposing of the rechargeable battery By law, all used batteries and accumulators must be recycled and not disposed of in domestic waste. Please dispose of them according to the official regulations. Take them to a recycling depot. The batteries/accumulators will be recycled since they may, for example, contain lithium (Li), nickel cadmium (Ni - Cd), lead (Pb), cadmium (Cd) or mercury (Hg).
Page 18
Im Frauental 14 92224 Amberg. The Swissvoice Service Center will replace it with and equivalent good or perform a repair. In the case of components subject to wear (e. g. batteries) this period lasts for 6 months from the date of purchase.
Warranty Certificate Warranty Certificate Garantieschein, Bon de garantie, Certificato di garanzia, Garantiebewijs, Takuutodistus, Garantibevis, Garantisedel, Garantibevis, Certificado de Garantía, Talão de garantia device type: (Gerätetyp, type d’appareil, tipo di apparecchio, toesteltype, laitetyyppi, maskintype, apparattyp, apparattype, modelo del aparato, modelo do aparelho): serial number: (Seriennummer, numéro de série, numero di serie, serienummer, sarjanumero, serienummer, serienummer, serienummer, número de serie, número de série):...
Need help?
Do you have a question about the eSense and is the answer not in the manual?
Questions and answers