Table of Contents
Advertisement
6 Calls
Note
•
When the power fails, the phone cannot access
emergency services.
Tip
•
Check the signal strength before you make a call or
when you are in a call (see 'Check the signal strength'
on page 12).
Make sure that all the handsets registered to
the base station are Philips D60 models in
order to have this feature functioning properly.
Make a call
You can make a call in these ways:
•
Normal call
•
Predial call
•
Call through the speed dial key
You can also make a call from the redial list,
phonebook list and call log.
Tip
•
For information of how to make a call from the redial
list, phonebook list and call log, see the base station's
user manual.
Normal call
1
Press
or
.
2
Dial the phone number.
» The number is dialed out.
» The duration of your current call is
displayed.
12
EN
Predial call
1
Dial the phone number
To erase a digit, press [Clear].
•
•
To enter a pause, press and hold
2
Press
or
to dial out the call.
Note
•
The talk time of your current call is displayed on the
call timer.
•
If you hear warning tones, the phone is almost out of
battery or out of range. Charge the battery or move
the phone close to the base station.
Call through the speed dial key
If you have already pre-saved a contact in the
speed dial key, press and hold the key to make
a call.
Tip
•
For information of how to set the speed dial keys, see
the chapter 'Phonebook', section 'Set the speed dial
keys'.
Answer a call
When there is an incoming call, the phone rings
and the LCD backlight flashes. Then you can:
•
press
or
to answer the call.
•
select [Divert] to send incoming call to the
answering machine (only applied to the
D605 model with answering machine).
select [Silent] to turn off the ringer of the
•
current incoming call.
Warning
•
When the handset rings or when the handsfree is
activated, keep the handset away from your ear to
avoid ear damage.
.
Advertisement
Table of Contents
