Get Started; Connect The Charger; Insert The Supplied Batteries - Philips D6050 Extended User Documentation

5 Get started

Caution
•
Make sure that you have read the safety instructions in
the 'Important safety instructions' section before you
connect and install your handset.

Connect the charger

Warning
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or underside of the phone.
•
Use only the supplied power adapter to charge the
batteries.
Note
•
If you subscribe to the digital subscriber line (DSL)
high speed internet service through your telephone
line, ensure you install a DSL filter between the
telephone line cord and the power socket. The filter
prevents noise and caller ID problems caused by DSL
interference. For further information on DSL filters,
contact your DSL service provider.
Connect each end of the power adapter to (for
multi handset versions only):
• the DC input jack at the bottom of the
extra handset charger.
• the power socket on the wall.
EN
8

Insert the supplied batteries

1
2
3