115 Vac Receptacle And Supplementary Protectors; Weld Output Terminals - Miller Electric Subarc DC 800 Owner's Manual

4-7. 115 VAC Receptacle And Supplementary Protectors

3
2
1

4-8. Weld Output Terminals

1
OM-236 684 Page 18
3
2
!
Turn Off power before
connecting to receptacle.
1 115 V 15 A AC Receptacle
RC9
Power is shared between RC9 and
Remote 14 receptacle RC8 (see
Section 4-13).
2 Supplementary Protector CB1
3 Supplementary Protector CB2
CB1 protects the 115 volts ac por-
tion of RC8 and RC9 from overload.
CB2 protects the 24 volts ac portion
of RC8 and Remote Power On/Off
from overload.
Press button to reset protector.
Ref. 800 166-C
!
Turn Off power before
connecting to weld output ter-
minals.
1 (+) Positive High Inductance
(Submerged Arc) Weld Output
Terminal
Use this terminal for Submerged Arc
(SAW), TIG (GTAW)-scratch start
only, or Stick (SMAW) applications.
2 (+) Positive Low Inductance
Weld output terminal
Not recommended for Submerged
Arc applications.
3 (−) Negative Weld Output
Terminal
Connect work cable to this terminal
for Submerged Arc applications.
Ref. 800 166-C