NordicTrack Commerical 2450 Treadmill User Manual page 12

5. Insert the wires and cable into the Upright (93)
as you set the console assembly on the Upright.
Be careful not to pinch the Upright Wire (88)
or the Upright Coaxial Cable (114).
Attach the console assembly with four 5/16" x
1 1/2" Screws (3) and four 5/16" Star Washers
(9). Start all four Screws, and then tighten
them.
6. Identify the Right Handrail (86). Slide the Right
Handrail between the console assembly and the
pulse assembly.
Attach the Right Handrail (86) with two 5/16"
x 2" Screws (4) and a 5/16" x 3 3/4" Screw (5)
as shown. Start all three Screws, and then
tighten them.
Attach the Left Handrail (not shown) to the
console assembly as described above.
5
Console
Assembly
3
9
114
93
6
Pulse
Assembly
86
4
12
3
9
93
Console
Assembly
4
5
88