Assembly - NordicTrack Commerical 2450 Treadmill User Manual

ASSEMBLY

•• Assembly requires two persons.
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you  nish all assembly steps.
•• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
•• Left parts are marked “"L”" or “"Left”" and right parts
are marked “"R”" or “"Right.”"
1. Go to www.nordictrackservice.com/registra-
tion on your computer and register your
product.
Registration provides the following benefits:
•• activates your product manufacturer’'s warranty
•• saves you time if you ever need to contact
Customer Care
•• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
CUSTOMER CARE (see the front cover of this
manual) to register your product.
2. Make sure that the power cord is unplugged.
Attach the Right Base Leg (94) to the right side
of the Upright (93) with two 5/16" x 3/4"
Screws (2).
Attach the Left Base Leg (not shown) to the
left side of the Upright (93) in the same way.
•• To identify small parts, see page 9.
•• Assembly requires the following tools:
the included hex key
one adjustable wrench
one Phillips screwdriver
To avoid damaging parts, do not use power tools.
1
2
10
2
93
94