Assembly - Healthrider H97t Treadmill User Manual

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, simply wipe it off with
a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex key and your own Phillips screwdriver , adjustable
wrench , scissors , and needlenose pliers .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the
key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the
quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid damaging
parts, do not use power tools. Extra hardware may be included.
1/4" Star 5/16" Star
3/8" Star 3/8" Nut (3)–4
Washer (11)–4 Washer (8)–2
Washer (5)–6
#8 x 1/2" Ground
1/4" x 5/8" 1/4" x 1 3/4"
#8 x 3/4" Screw
Screw (1)–1
Screw (9)–4
Screw (10)–4
(6)–18
5/16" x 3 1/4" Screw (7)–2
3/8" x 1 3/4" Bolt (12)–1
3/8" x 2" Bolt (13)–1
3/8" x 2 1/2" Bolt (2)–2
3/8" x 3 1/2" Screw (4)–6
6