Healthrider H97t Treadmill User Manual page 7

1. Make sure that the power cord is unplugged.
Remove the ties securing the Upright Wire (70)
to the Base (80). Pull the Upright Wire and the
base ground wire (A) through the indicated hole
in the Base.
Attach the base ground wire (A) to the Base (80)
with a #8 x 1/2" Ground Screw (1).
Press a Base Cap (77) into each side of the
Base (80). Press the Grommet (67) into the
square hole in the Base.
2. Identify the Left Upright (75), which is either
marked "Left" or "L." Have a second person hold
the Left Upright near the Base (80).
See the inset drawing. Tie the wire tie in the
Left Upright (75) securely around the end of the
Upright Wire (70). Then, pull the other end of the
wire tie until the Upright Wire is routed through
the Left Upright.
1
Hole
77
A
1
70
2
75
70
Wire Tie
7
67
80
70
75
Wire
Tie
80