Base (80) - Healthrider H97t Treadmill User Manual

11. Raise the Frame (49) to the position shown.
Have a second person hold the Frame until
step 12 is completed.
Orient the Storage Latch (51) so that the large
barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (51) to
the Base (80) with a 3/8" x 2" Bolt (13) and a 3/8"
Nut (3).
12. Attach the upper end of the Storage Latch (51)
to the Frame (49) with a 3/8" x 1 3/4" Bolt (12)
and a 3/8" Nut (3).
Attach the Wheels (81) to the Base (80) with two
3/8" x 2 1/2" Bolts (2) and two 3/8" Nuts (3). Do
not overtighten the Nuts; the Wheels must
turn freely.
Lower the Frame (49) (see HOW TO LOWER
THE TREADMILL FOR USE on page 22).
13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see pages 24 and 25).
11
51
Latch
Knob
Large
Barrel
12
49
3
2
3
81
12
49
3
13
80
12
51
80
3
2
81