Convection Roasting - GE 164D2966P087 Use And Care Manual

How to Set Your Oven for Convection Roasting When Using the Temperature Probe
NOTE: For best results when roasting large
turkeys and roasts, we recommend using the probe
included in the convection oven. For correct
placement of the probe, see the description in the
Regular Roasting section.
The display will flash "PROBE" and the oven
control will signal if the probe is inserted into
the outlet, but the oven is not programmed for
the probe.
Your double oven has controls for the upper oven
and the lower oven. Be sure to set the correct
control. Pads on the left side of the panel are for
the upper oven. Pads on the right side of the panel
are for the lower oven. The TIMER ON/OFF,
COOK TIME, STOP TIME, OVEN LIGHTS,
INCREASE and DECREASE pads can be used for
either oven.
lowest position (A).
Insert the probe into
the meat.
2. Plug the probe
into the outlet in the
oven. Make sure it is
pushed all the way in.
Close the oven door.
PROBE
UPPER OVEN
4. Press the INCREASE or
DECREASE pad until the desired
internal probe temperature is
displayed.
v
5. Press the CONVECTION ROAST pad.
CONVECTION
ROAST
16

CONVECTION ROASTING

(upper oven only—continued)
6. Press the INCREASE or DECREASE pad.
display. Continue pressing until the desired oven
temperature is displayed.
The oven will start automatically. The words
set will be in the displuy.
After a few seconds, the words .'L,O PROBE" will
replace the roasting temperature in the display.
After the internal temperature of the meat reaches
o
shown in the display.
7. When the internal temperature of the
meat reaches the number you have
CLEAR
probe and the oven turn off'
the
OFF
and the oven control sign:lls. To stop
the signal, press the CLEAWOFF
pad. Use hot pads to remove the probe
pull on it—lhey might damage it.
CAUTION: To prevent possible burns, do not unplug
the probe from the oven outlet until the oven has
cooled. Do not store the probe in the oven.
NOTE:
the display will flash until the probe is removed
from the oven
You will not be able to use the probe in the upper
oven during timed oven operations. This is because
rather than time.
You will hear a fan while cooking with this feature.
The fan will stop when the door is opened but the
heat will not turn off.
A second fan may automatically turn on and off to
cool internal parts. This is normal and the fan may
continue to run even after the oven is turned off.
You can use the timer even thou&h you cannot use
timed oven operations.
To change oven temperature during the
Convection Roast cycle, press the
CONVECTION ROAST pad and then press the
INCREASE or DECREASE pad to get the new
desired temperature.
tongs to
use