CNX 3000
Users Manual
Continuity Test
Warning
To prevent possible electrical shock, fire, or
personal injury, disconnect power and
discharge all high-voltage capacitors before
you measure resistance, continuity,
capacitance, or a diode junction.
The continuity test uses a beeper that sounds when a
closed circuit is sensed. The beeper lets you do continuity
tests without the necessity to look at the display. To do a
continuity test, set up the Product as shown in Figure 5.
18
MyFlukeStore
www.
Shop for Fluke products online at:
Figure 5. Continuity Tests
1.877.766.5412
.com
gxr005.eps