Fluke CNX C3000 User Manual page 36

CNX 3000
Users Manual
When the module selection mode ends, all modules that
were set to bind, show in the display. All modules not
selected go out of view.
Note
If you do not select modules, all modules shown
in the display are bound to the Product when the
module selection mode ends.
The model number of each bound module is replaced
with the module measurement. The radio button on the
Product and each module bound to the Product, flashes
one time in a 5 second interval. The radio button on each
non-bound module does not flash.
You can identify which measurement in the display of the
Product belongs to which module with the ID number set
when the module bound with the Product. Look for the
module with the same ID number in its display. To help
identify which module is shown in the Product display
when the module display cannot be seen, push  to
select a module in the list. The radio button () on the
module the measurement in the Product display
represents flashes at a faster rate.
28
MyFlukeStore
www.
Shop for Fluke products online at:
1.877.766.5412
.com