Replacing The Headlight Bulb - Yamaha WR250R Owner's Manual

Replacing the headlight bulb

This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Take care not to damage the follow-
ing parts:
Headlight bulb

Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
Headlight lens

Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU45215
ECA10650
1. Do not touch the glass part of the bulb.
1. Remove the headlight cowling to-
gether with the headlight unit by
removing the bolts and pulling up-
ward as shown.
1
1. Bolt
2. Disconnect the headlight coupler,
and then remove the headlight
1. Headlight coupler
2. Headlight bulb cover
1
1. Headlight bulb holder
6-35
bulb cover.
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1
4. Place a new headlight bulb into po-
1
2
2
3
4
5
6
7
8
9