Kenwood TS-2000 Instruction Manual page 19

PF
F LOCK A
#4 QUICK MEMO keys
Controls the Quick Memory function {page 64}.
• MR key
Press to recall data from the Quick Memory
{page 65}.
• M.IN key
Press to write data into the Quick Memory
{page 64}.
#5 SATL key
Press to activate Satellite communication mode
{page 53}.
#6 Frequency control keys
These keys control functions related to selecting a
frequency, a VFO, or a memory channel.
• A/B / M/S key
Press to select either VFO A or VFO B {page 18}.
In Satellite mode, press to swap the MAIN and
SUB frequencies so that you can change the
frequencies with a Tuning control {page 54}.
• SPLIT/ REV key
Press to use split-frequency operation which
allows you to use different transmit and receive
frequencies {page 31}. In Satellite mode, press to
toggle the Trace Reverse function ON and OFF
{page 54}.
• VFO/M / VFO/CH key
Press to select either Memory or VFO mode
{page 59}. In Satellite mode, press to toggle the
VFO and memory channel operations {page 54}.
• A=B/ TRACE key
Press to copy the data in the currently selected
VFO to the other VFO {page 31}. In Satellite
mode, press to toggle the TRACE function ON and
OFF {page 54}.
HF/VHF/UHF ALL MODE MULTI BANDER TS-2000
HF/VHE/UHF ALL MODE MULTI BANDER TS-2000
MAIN
AUTO
CAR
LSB
USB
MIC
REV
TX MONI
CW
PWR
FSK
DELAY
NAR
KEY FM
AM
CLR
SEL
1MHz
DISP CTRL
#7 Ms s s s s VFO/ MG.SEL key
Press to transfer data from a memory channel to a
VFO {page 61}. Press [FUNC], [Ms s s s s VFO/ MG.SEL]
to enter Memory Group Select mode {page 64}.
#8 M.IN key
Writes data into a memory channel {page 58} or
selects Memory Scroll mode {page 60}.
#9 RIT/ CW TUNE key
Press to switch the Receive Incremental Tuning
function ON or OFF {page 38}. Press [FUNC],
[RIT/ CW TUNE] to activate the automatic zero-beat
function for CW mode {page 30}.
$0 XIT/ ALT key
Press to switch the Transmit Incremental Tuning
function ON or OFF {page 40}. Press [FUNC],
[XIT/ ALT] to switch the Auto Lock Tuning mode for
the 1.2 GHz band (FM) ON or OFF {page 72}.
$1 CLEAR key
Press to reset the RIT/XIT frequency offset to zero
{pages 38, 40}.
$2 SET/ P.C.T. key
Press to set received DX Packet Cluster frequency
data to the main transceiver when the Packet Cluster
Tune mode is activated. Press [FUNC], [SET/ P.C.T.]
to switch the Packet Cluster Tune mode ON or OFF
{page 53}.
$3 TNC Status Indicators
•
•
•
41
36 35 34 42 39
CW TUNE
RIT
ALT
XIT
CLEAR
P.C.T
SET
SUB
MENU
TF-
SET
MAIN SUB
SG.SEL
SCAN M.IN
M VFO
37 38
9.6k LED
Lights when the internal TNC is operating at
9600 bps. The default operating mode is
1200 bps {page 50}.
STA LED
Lights when the internal TNC holds the data in the
buffer to transmit.
CON LED
Lights when the internal TNC is connected to
another TNC.
4 GETTING ACQUAINTED
40
43
9.6k STA CON
RIT/SUB
_
+
11