Automatic Simplex Check (Asc); Transmitting A Tone; Memory - Kenwood TS-2000 Instruction Manual

10 SUB-RECEIVER

AUTOMATIC SIMPLEX CHECK (ASC)

You can also use ASC functions on the 144 MHz and
430/ 440 MHz bands of the sub-receiver. While using
a repeater, ASC periodically monitors the strength of
the uplink frequency to check the signals. Press and
hold [TF-SET] until "[R]" appears on the SUB band
display. Refer to "AUTOMATIC SIMPLEX CHECK"
{page 34} for function and control details.

TRANSMITTING A TONE

You can assign another Tone to the sub-receiver.
Refer to "TRANSMITTING A TONE" {page 33} for
function and control details.

MEMORY

You can also utilize all the memory functions
{page 58}, including the Quick Memory function
{page 64}, while you are operating the sub-receiver.
However, the operating frequency range is limited to
the sub-receiver's frequency coverage. You cannot
recall any memory channels that are outside the sub-
receiver's frequency coverage. These channels are
automatically skipped when they are recalled on the
sub-receiver.
48