Chapter 21 Appendix; Ts-B2000 Front Panel - Kenwood TS-2000 Instruction Manual

APPENDIX

TS-B2000 FRONT PANEL

RESET
5
PHONES
4
MIC
3
q [
] (POWER) switch
Press and hold briefly to switch the transceiver power
ON. Press again to switch the power OFF.
w Power indicator
While the transceiver is turned ON, it lights red.
e MIC connector
Connect a compatible microphone to this connector,
then securely screw down the connector locking ring
{page 3}.
r PHONES jack
Connect a set of headphones to this jack. Inserting a
plug into the jack automatically mutes the audio from
the speaker {page 3}.
t RESET button
Push this switch to reset the microprocessor in the
transceiver. This sets all the contents of the memory
function to the factory default values.
1 2
DIGITAL
SIGNAL
PROCESSOR
109