Dialling Stored Dtmf Numbers; Clearing Stored Dtmf Numbers; Redialling - Kenwood TK-7100 Instruction Manual

D S DTMF N
IALLING TORED
1 Press the microphone
• " " appears on the display.
2 Enter the desired memory location number (1 ~ 9).
• The digits stored in the selected location number appear on the display.
• To cancel, press any key other than the PTT switch.
3 Press the PTT switch.
• If programmed by your dealer, no DTMF tone will sound when "D" is transmitted.
"D" is used for a pause time. The pause duration is programmed by your dealer.
C S
LEARING TORED
1 Press the microphone # key.
• " " appears on the display.
2 Press the microphone # key again.
• " " appears on the display.
• To cancel, press any key other than 1 ~ 9.
3 Enter the memory location number (1 ~ 9) you want to clear.
• The memory location number is cleared and the display returns to normal.
R
EDIALLING
1 Press the microphone
• " " appears on the display.
2 Press the microphone 0 key.
• The digits last dialled appear on the display.
• If there is no data in the redial memory, an error tone will sound.
• To cancel, press any key other than the PTT switch.
3 Press the PTT switch.
Note: Switching the transceiver power OFF clears the redial memory.
UMBERS
key.
DTMF N
UMBERS
key.
13