Honda Goldwing F6B Owner's Manual page 136

12/12/06 16:26:13 32MJG600_136
OPERATION
ABS Indicator Light
Normally, this light comes on when the ignition is turned ON and goes off after
starting to ride. If there is an ABS problem, the indicator light comes on and
remains on or blinks. The ABS system does not operate when the ABS
indicator light is on or blinking.
If the ABS indicator light blinks while riding, stop the motorcycle in a safe
place and turn off the engine.
Turn the ignition ON again. The light should come on, and then go off after
starting to ride. If it does not go off or if it blinks again, ABS is not functioning,
but the brakes still work a Dual CBS and provide normal stopping ability.
However, you should have the system checked by your dealer as soon as
possible.
The ABS indicator light may blink if you turn the rear wheel placing the
motorcycle upright on the stand. This is normal. Turn the ignition OFF to stop
the blinking.
A orange LED is used for the ABS indicator light. Be sure that the LED lights
when the ignition is ON. If the LED fails to light, see your dealer.
ABS indicator light
126