Erasing Images; Erasing1 Frame - Mamiya ZD Back User Manual

Erasing Images

This section explains how to delete taken images. There are two ways of delet-
ing images: [One Image] which deletes one frame at a time and [All Images]
which deletes all the images stored in the folder.

Erasing1 Frame

Enables frames to be deleted one by one while confirming the process on the
LCD monitor.
1. Press the Display button to display the frame.
The most recently recorded image will be displayed on the LCD monitor.
2. Select the image you wish to delete with the toggle key
Press [ ] to display the previous image, and [ ] to display the next image.
3. Press the Delete button
A message confirming that the image is to be deleted will be displayed.
4. Select [1 Frame] with the [ ] and [ ] toggle keys, and then press the
OK button.
The frame being displayed will be deleted.
Once the image has been deleted, the subsequent image will be displayed.
Repeat the above procedure from #3 to continue deleting images. Press
the [Cancel] button to abort deletion.
• When both RAW and JPEG images are stored simultaneously and one
of them is deleted, the remaining image will be displayed. The next im-
age taken will be displayed when [0. RAW & JPEG] is selected with [10.
Select File Type to Erase] on the playback menu.
Important:
Note that deleted images cannot be restored.
NOTE:
Images that have been protected and display the [
58
.
] mark cannot be deleted.
.