Basic Operation - Turbo Air TST-48SD Installation And Operation Manual

BASIC OPERATION

TST-28SD, TST-48SD, TST-72SD
TUR-28SD, TUR-48SD, TUR-72SD
TUF-28SD, TUF-48SD
1. The controller(thermostat) is located at the top inside of the unit.
2. The factory setting for the control is 'Normal'.
3. Setting toward "Cool" for higher temperature and "Cold" for lower temperature.
COOL
OFF
COOL
OFF
COLD
COOL
OFF
COLD
4. The thermostat controls compressor's on/off by sensing inside temperature.
NORMAL
TUR-28SD
TUF-28SD
COLD
NORMAL
TST-28SD
NORMAL
TUR-72SD
TST-72SD
Turbo air
NORMAL
COOL
OFF
NORMAL
COOL
OFF
7
COLD
TUR-48SD
TUF-48SD
COLD
TST-48SD