Title/Video Screen - American Dynamics ADCTDN0230P Instructions Manual

ADCTDN2412N_P_EN.book Page 37 Friday, September 28, 2007 12:49 PM
Item
INPUT This sets the polarity of the AUX input signal.
POLARITY
MAKE
BREAK
[Default setting: MAKE]
Memo:
● When AUX MODE item is set to AB&W OUTB, A- - -B
will be displayed and settings is disabled.

TITLE/VIDEO screen

Item
CAMERA This item sets the title to be displayed permanently on
TITLE EDIT the lower part of screen. A maximum of 24 characters
can be set for the title.
ACamera title settingB (A Pg. 48)
W.BALANCE Select ATW or ATW wide for auto tracking white balance
that respond to scene lighting changes. Select AWC
when white balance is fixed and does not respond to
scene lighting changes.
Memo:
● In B&W mode, A- - -B will be displayed and settings is
disabled.
[Default: ATW]
ATW This is the Auto-Tracking White Balance mode.
(Automatic color temperature tracking.) The camera
adjusts the white balance automatically according to the
color temperature of the illumination.
ATW(WI This mode supports an even wider range of color
DE) temperature than ATW. Use this mode when white
balance cannot be achieved using ATW mode.
Functions and settings
: When the contact between all alarm input
terminals and GND terminals changes from
open to close, the alarm will activate.
: When the contact between all alarm input
terminals and GND terminals changes from
close to open, the alarm will activate.
Functions and settings
37