American Dynamics ADCTDN0230P Instructions Manual page 53

ADCTDN2412N_P_EN.book Page 53 Friday, September 28, 2007 12:49 PM
Set the B&W/COLOR item to AUTO
1.
Select the item B&W/COLOR on the TITLE/VIDEO screen and press
the SET button.
The B&W/COLOR screen is displayed.
2.
Press the SELECTOR switch up or down (J, K) and select MODE.
3.
Press the SELECTOR switch left or right (H, I) and set to AUTO.
TITLE/VIDEO
CAMERA TITLE EDIT..
W. BALANCE AWC
SHUTTER..
GAIN..
E
B&W/COLOR..
BLC MODE OFF
<MENU>RETURN <SET>SUB MENU
TITLE/VIDEO screen
B&W/COLOR
E
MODE COLOR
AUTO LEVEL - - -
AUTO TIME - - -
<MENU>RETURN
B&W/COLOR screen
4.
Press the MENU button twice.
The setting is complete and the screen returns to the main menu.
Memo:
● When near-infrared illumination is used, a B&W screen may switch to a
color screen if the object reflects light excessively. To perform switching
with higher accuracy, we recommend that you use the settings mentioned
in AControl by B&W/Color switching signal from externalB (A Pg. 54).
● In the case of B&W/Color mode, the lens performance may cause the
image to be out of focus when the illumination of the object is near-infrared
light. In this case, use a lens that is compatible with near-infrared light.
B&W/COLOR
E
MODE AUTO
AUTO LEVEL NORMAL
AUTO TIME 30s
<MENU>RETURN
53