GE JKP27 Owner's Manual page 8

Special features of your oven control.
8
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
the cooking function is finished.
To activate this feature, follow the steps
below.
Both touch pad ovens follow the
same step 1. First press the upper
oven BAKE and BROIL HI/LO pads at
the same time for 3 seconds until the
display shows SF. Then proceed with
steps 2 through 3, using the pads for
the upper or lower oven.
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time
or temperature, you may notice the display
changes slowly. This special feature allows you to
change the speed. To set the speed you prefer,
follow the steps below.
Press the upper oven BAKE and BROIL
HI/LO pads at the same time for 3
seconds until the display shows SF.
Press the + pad. The display will show
you a set speed between 1 and 5.
Press the + pad to increase the speed
up to the number 5.
Press the – pad to decrease the speed
down to the number 1.
Press START to activate the setting
and leave the control set in this
special features mode.
Press the COOKING TIME pad. The
display will show Hld OFF.
Press the COOKING TIME pad again to
activate the feature. The display will
show Hld ON.
Press the START pad to activate the
cook and hold feature and leave the
control set in this special features
mode.
NOTE: This feature is not available, for the lower
oven, on models with oven knob(s).