CHECK SIGNALS AND ALARM
SIGNAL
▲ Indicates no signal.
Indicates that the thermometer is receiving a signal from the sensor.
ALARM
Three beeps – indicates that the monitor is not reserving a signal from sensor.
Four beeps – indicates that the current temperature is within five degrees of the
target temperature.
A beep - indicates that the sensor has reached the target temperature.
A fast and continuous beep - indicates that the meat is overcooked.
BATTERY
A battery symbol appears on the monitor, indicating the condition of the batteries.
Please observe the following information for an indication of when the batteries need
to be replaced.
Main – indicates that the monitor's battery is low.
Remote – indicates that the thermometer sensor battery is low.
Main remote – indicates that the batteries are low in both the monitor
Use only fresh batteries of the specified size.
Do not mix old and new batteries, different types of batteries (standard, alkaline
or rechargeable), or rechargeable batteries of different capacities.
If you do not plan to use the thermometer for a month or longer, please remove
the batteries to prevent leakage and damage.
KATMRBBQWLA E-user manual
and thermometer sensor.
7