Hoover IRONSPEED SRD 4107 User Manual page 9

48001378-1 - Ironspeeed_SR_final.pdf 05/01/2010 09:23:42
C
M
Y
CM
MY
CY
CMY
K
7 - GB
Ironspeeed_SR__1-15_union_pprod3.indd 7
For your support, in the appliance is implemented a switch that automatically goes
In order to inform you of the situation you will hear a buzzer sound and the auto
Chapter 2: Preperation for Use
Due to the powerful output of steam, Hoover recommends the use of an active
ironing board with blowing and vacuuming function which allows escape of any
excess steam.
Place the ironing system on a stable and level surface, for example on the hard part
of an ironing board or on a heat-resistant surface.
Chapter 2.1 - What Kind of Water May be Used?
The Hoover ironing system has been designed to be used with tap water only. There
is no need to use distilled or pure distilled water. Nevertheless, in case your water is
very hard, you can mix 50% of distilled water with 50% of tap water. Do not use any
other kind of water or do not add any contents in the removable water tank as it can
damage your appliance.
Chapter 2.2 - Filling the Water Tank
Remove the water tank (5) from the stand by pressing the water tank knob (10). Fill
it with tap water. Do not exceed the max mark. Replace the tank at its original place.
5
Fig.10: Water Tank Filling Graphic
11-12-2009 9:59:56