Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hoover IronSpeed
Summary of Contents for Hoover IronSpeed
-
Page 2: Parts Description
Parts Description Control Panel Iron Resting Mat Water Tank Filler Cover Supply Hose Mains Fig. 1: Base and Tank Description Temperature Dial Steam Trigger Temperature Dial Indicator Fig. 2: Domestic Iron Description On/off switch “Water Tank Empty” Light “Steam Ready” Light Fig. -
Page 3: Important Safety Instructions
Introduction Dear customer, First of all, we would like to congratulate you for purchasing this Hoover ironing system and to thank you for the confidence you have in Hoover brand. This appliance has been manufactured with great care, respecting all of our quality criteria and has been tested several times. - Page 4 Important Safety Instructions • This product has been designed for domestic use only. In case of any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer is not responsible and the guarantee will not apply. • Before connecting your appliance, check if the main voltage is the same as the voltage indicated on your appliance and that the power outlet is connected to the...
- Page 5 Important Safety Instructions before doing any maintenance work. • The iron must not be left unattended while it is connected to the supply mains and before it has cooled down. • Do not unplug the appliance by pulling on the cord or on the appliance. •...
- Page 6 Please refill the tank following the instructions in the chapter 2.2 Chapter 2: Preparation for Use Due to the powerful output of steam, Hoover recommends the use of an active iron- ing board with blowing and vacuuming function which allows escape of any excess steam.
- Page 7 Chapter 2.3 - Switching on the Appliance Connect the appliance with the mains cord to an earthed socket and switch on the power. Press the on/off switch. The light (1A) will illuminate, this tells you that the appliance is working and that the boiler is heating up. After approximately 2 minutes, the “steam ready”...
- Page 8 Chapter 3.3 - How to choose the Correct Soleplate temperature To obtain the best results, it is important to set the correct temperature of the soleplate. Textile Soleplate T°C Wrinkled Textiles •••/Max Tricky Zone ••/••• Jeans Cotton ••• Linen Starched Clothes •••...
-
Page 9: Chapter 4: Maintenance And Cleaning
To clean the plastic parts of the stand, please use soft clothes. Troubleshooting These are common problems you may encounter when using your appliance. If you are unable to solve any issue please contact your local Hoover Service Office. Problem Cause... - Page 10 Hoover dealer or direct from Hoover. When ordering spare parts, always check your model number. Hoover Service Should you require service at any time, please contact your local Hoover Service Office. Please see all the contact details below. Safety Hoo ver believes that independent approval is the best way of demonstrating safety in design and manufacture.
- Page 11 Printed in P.R.C. ® PART No. 48007881/01...